41cf2cbb8e9bfb1647ee9330456e8353a86c012a
37
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 hermes
|
41cf2cbb8e |
fix(analysis): rising gravity, undated readings, and the range band (#13)
Build and Push Image / Build and push image (push) Successful in 3m19s
fix(analysis): rising gravity, undated readings, and the range band (#13) |
||
|
hermes
|
76a4d0805c |
fix(analysis): the review findings - rising gravity, undated readings, the band
A second, deeper review of PR #12 found five things the first review did not. All are fixed here. The band was not the band ------------------------- The fermentation curve's shaded range was drawn as ONE dataset with `fill: "+1"`, which fills to the NEXT dataset - and the next dataset was the median line, not the maximum. So the band shaded min-to-median, the upper half of the range was drawn as a hairline but never shaded, and the tooltip said "range min to max" while the picture showed something else. The band is now two datasets - the min curve filled down to a max curve - with the max hidden from the legend. Rising gravity -------------- `attenuation_percent` rejected a final gravity below 1.000 and one implying more than 100% attenuation, but a run whose gravity went UP produced a NEGATIVE attenuation - which was then averaged into the headline figure and plotted as a negative bar. Verified against the live code: OG 1010 -> FG 1020 gave -100.0%. Now rejected, and reported by `implausible_runs` with the reason "the gravity went up, which is usually a mis-ordered pair of readings". Undated readings ---------------- An undated reading sorted to the front of the run, so it became the original gravity - which put the OG after the FG and produced a negative attenuation. The OG now comes from the earliest *dated* reading, and `days_to_target` skips the readings it cannot place on the timeline rather than giving up on the whole run. Verified: readings 1050 (dated), 1005 (undated), 1010 (dated) gave None instead of 24 days, and an OG of 1005 instead of 1050. Active runs on the curve ------------------------ The curve chart filtered on `curve.length > 1` only, so it plotted the active runs as well - a partial fermentation on a chart meant to describe how a completed one behaves. It now excludes them, along with the suspect runs. Four fetches, one payload ------------------------- `/api/runs` carries every reading of every run, and four charts each fetched it independently - so the analysis page made two identical round-trips of the whole collection. There is now one shared fetch. Also ---- - The "Readings that need a second look" table links to the run, so a suspect reading can be corrected in one click. - `days_to_1015` and the `curves` variable were computed and never used. Removed. - A reading below 1.000 now says what it is - "beer cannot be less dense than water, so this is almost certainly a typo (a 1.012 reading entered as 012?)". The reading is still SAVED: rejecting it would lose the brewer's actual observation, and seeing it recorded is how they spot the mistake. 142 tests (up from 134). |
||
|
hermes
|
21e7553ab4 |
feat(analysis): attenuation, fermentation curves and brew timings (#12)
Build and Push Image / Build and push image (push) Successful in 8m10s
feat(analysis): attenuation, fermentation curves and brew timings (#12) |
||
|
hermes
|
6fec78e9e4 |
fix(analysis): address the two review nits
The re-review returned APPROVED with two low-severity notes. - The prose said "Across 15 finished brews", which reads as though there are only 15 brews. It now says "Across 15 of 16 finished brews", so the exclusion is visible in the sentence itself and not only in the card header. - `/api/runs/<run_id>` did not carry the `suspect` flag that `/api/runs` does, so a consumer of the detail endpoint could not tell an impossible run from a good one. It does now, with a test. 134 tests. |
||
|
hermes
|
bbd9fe17e5 |
fix(analysis): exclude suspect runs from every average, not just attenuation
Review finding, and it was right. The PR claimed that runs with impossible readings were "excluded from the averages". That was only true of the attenuation average. Run 12's bad final gravity was still poisoning three other statistics: - **Brew time** - its 56 days were folded into the average, making a typical brew look like 13.7 days when it is 10.9. - **Time to 1.010** - its 56 days did the same to that figure (8.4d). - **The history page's ABV** - an 18.64% ABV, which made run 12 the "strongest" beer in the history and pulled the average up. - **The fermentation curve** - its curve plunges from 1.042 to 0.900, which dragged the median line down and stretched the min-max envelope to cover a gravity below water. One bad reading was reaching four different statistics. What changed ------------ - The suspect runs are computed once and excluded from every aggregate: the attenuation, brew-time and time-to-1.010 averages, the fastest and slowest brews, the history page's ABV average, and its strongest and lightest. - `/api/runs` now carries a `suspect` flag, and the charts skip the flagged runs - the attenuation chart and the fermentation curve. - The suspect run stays in the table, with a "not counted" chip and a tinted row, so it can be corrected. It is excluded from the figures, not hidden. The card header says "16 brews (15 counted)" and the prose says how many brews the figures are based on. Tests ----- 133 (up from 127). New coverage: the suspect run is excluded from the brew time and time-to-1.010 averages, it is still listed for review, it is flagged in the API, it is not the strongest brew in the history, and the charts filter it out. The `logged_in` fixture moved to conftest.py, where both test modules can use it. |
||
|
hermes
|
4d1e070d74 |
docs: document the analysis page and the CI deploy flow
The RUNBOOK still said the workflow did not deploy to the cluster. It does now - it builds, pushes, applies the manifests, rolls the pods and verifies the app from inside the pod. The manual deploy path is documented alongside it, along with the dry-run step that catches the schema errors kubectl apply silently swallows. |
||
|
hermes
|
e1a9a7384f |
feat(analysis): attenuation, fermentation curves and brew timings
Adds the analysis page the old app never had: how consistently the brews
ferment, and how long each one takes.
What it shows
-------------
- **Attenuation by brew** - what fraction of the original gravity was
fermented away, for every finished brew.
- **Fermentation curves** - the typical shape of a fermentation, drawn as a
median curve with the min-max envelope behind it. Plotting every brew
individually gave 16 near-identical lines and an unreadable legend.
- **Every finished brew** - OG, FG, ABV, attenuation, days in the fermenter,
days to reach 1.010, and the finish date.
- **Readings that need a second look** - readings outside the plausible
hydrometer range.
- Headline figures: average attenuation and its spread, average brew time,
average time to 1.010.
Data quality
------------
One live run (run 12) has a final gravity of 900, which worked out as 338%
attenuation and dragged the average to 103.2%. That is not a real result,
so:
- Attenuation is rejected when the final gravity is not physically possible
for the original gravity.
- Runs that fail that check are EXCLUDED from the averages rather than
silently distorting them, and are listed on the page as needing review.
- The average now reads 87.5% +/- 7.4 percentage points across 16 brews.
Chart bugs found while building this
------------------------------------
- **The gravity charts had their y axis reversed.** With `reverse: true`
the high reading sits at the BOTTOM, so the fermentation curve climbed
left to right - it read as gravity *rising* as the beer fermented. A
brewer reads a fermentation as a descending line. The point-scale run
chart on the run detail page had the same bug. Both are fixed.
- **The curve chart's x axis was treated as categorical.** The x values are
numeric (0-100), and Chart.js defaults a line chart's x axis to
category, which collapsed every point onto index 0 and rendered the
curve as a sliver at the origin. The axis is now explicitly linear.
- **The curve was interpolated by exact key lookup**, so it only worked when
every brew happened to be read at the same progress points. It now
interpolates between a brew's actual readings, and the curve carries 21
points across the full range.
- **Long beer names were clipped** at the left edge of the attenuation
chart ("...x crying out loud"). Names are trimmed to 18 characters with
an ellipsis; the tooltip and the table carry the full name.
Tests
-----
127 (up from 105). The two chart regressions are covered by reading
`charts.js` and asserting the gravity axis is not reversed and that long
names are trimmed - these are exactly the kind of change that silently
reverts, and they are invisible to a screenshot test.
|
||
|
hermes
|
0785c11790 |
fix(ci): use the house CI pattern instead of a bespoke one (#11)
Build and Push Image / Build and push image (push) Successful in 4m27s
fix(ci): use the house CI pattern instead of a bespoke one (#11) |
||
|
hermes
|
563e22fb00 |
fix(ci): use the house CI pattern instead of a bespoke one
I had built a parallel mechanism for this repo rather than copying the workflow that is already known to work on this cluster. The working patterns are `armistace/resbuilder_ai` and `armistace/wedding-photos`, and the house skill (`gitea-forgejo/references/homelab-ci-workflow-template.md`) documents them. This rewrites the workflow to match them. What changed, and why each piece was wrong: - ONE job, not three. The kubeconfig is written at the TOP, before buildx, because the buildx `kubernetes` driver needs it to create its builder pod. My split into test/build/deploy jobs put the kubeconfig in a job that ran AFTER the build, which the kubernetes driver cannot use. - `driver: kubernetes` with `namespace=gitea-runner`, not the `remote` driver. I switched to the remote driver to dodge an x509 error, but the real cause was that the job container lacked the k3s CA - and the working workflows solve that the same way: the kubeconfig carries the CA. The remote driver was a workaround for a problem the house pattern does not have. - The CA-refresh script and the pinned-fingerprint file are deleted. They existed to work around the same x509 error, and the house pattern does not need them. - The deploy step installs kubectl and applies `kube/*.yaml`, creating the image-pull secret idempotently, then does a `rollout restart` (the image tag in the manifest does not change, so `apply` alone does not roll the pods). - The verification step exercises `/healthz` and `/readyz` from inside the pod, using the pod's own python - the pattern the house skill documents for probing a deployed app. There is no `curl` in the slim image. The Deployment manifest also changes: - `runAsUser: 999` at the POD level, matching the `beer` user in the image. kubelet can only verify a numeric UID, so `runAsNonRoot` on the container fails with a named user. - `allowPrivilegeEscalation` and `capabilities` are on the CONTAINER, not the pod - the house skill notes that putting them on the pod makes `kubectl apply` silently reject the manifest. - The image is `:latest` again, with the rollout restart doing the work - the `SET_BY_CI` sentinel was my own invention and does not fit the pattern. All three manifests were validated with `kubectl apply --dry-run=client` and then applied for real: the rollout completed and `/healthz` and `/readyz` both return 200 from inside the pod. |
||
|
hermes
|
bb071343c2 |
fix(ci): count the kubeconfig's clusters correctly
The cluster-count guard I added used `grep -c '"name"'`, which counts
LINES. The jsonpath output is a single line, so the count was 1 for a
kubeconfig with clusters and 1 for one without - which made the guard
reject every kubeconfig:
ERROR: the kubeconfig has no cluster entries.
The count is now done with `grep -o . | wc -l`, which counts occurrences
rather than lines. Tested against both cases:
- a real kubeconfig with a stale CA -> the CA is refreshed and kubectl works
- a kubeconfig with no clusters -> refuses with a clear message
|
||
|
hermes
|
8048a1112d |
docs: fix the PR #5 merge commit message (#10)
docs: fix the PR #5 merge commit message (#10) |
||
|
hermes
|
9f2671fa71 |
feat(active): add the active beers page, run metadata and tap numbers (#5)
Adds the pages that were missing: an "Active Beers" view of what is in the fermenter right now, and the per-run metadata (canonical name, tap number, original gravity, brew notes) that could not be derived from the readings. Why the metadata is needed -------------------------- The `beer_data` collection stores a beer name on *each reading*, and that name drifts within a run - run 4 was entered as "Necatron-Christmas Beer", then "Nocturna the Christmas beer", then "Nocturna Christmas beer". There was nowhere to record a tap number, a confirmed original gravity, or a note about the brew. The new `beer_runs` collection holds one document per run with exactly those details. It starts empty; `scripts/backfill_run_metadata.py` populates it from the existing readings. The script is idempotent, only ever inserts into `beer_runs`, never touches `beer_data`, and never overwrites a name you have already set by hand. The active beers page --------------------- A card per brew that is still in the fermenter, showing the tap number, the current gravity, the projected alcohol, how many days it has been brewing, a sparkline of the gravity so far, and the latest comment. A run with only one reading and no recorded original gravity has no reliable estimate, so the alcohol figure shows a dash rather than a misleading number - record the OG or take a second reading and it appears. The same applies to the existing reads, where the legacy app's assumed OG of 1012 produced *negative* alcohol for a perfectly normal OG. Also adds the history page: alcohol by brew, brews per month, every run in a table, a comparison of the standard ABV formula against the legacy one, and a list of readings that fall outside the plausible hydrometer range. Changes to the existing pages ----------------------------- - The brew-process page and the run detail page now show the canonical run name and the latest comment, and the run detail page lets you edit the metadata inline. - Gravity is displayed as a decimal reading (1.039) with the point scale beneath it (39 points), which is the way a brewer reads it. Labelling the stored `1039` as "1039 points" would have been wrong. - A run's display name now prefers the name on its *final* reading - the one written when the brew was finished, so the name the operator settled on - falling back to the most-used name. - `upsert_run_metadata` now clears a field when it is passed as `None`, so a name or tap number can be deleted. `upsert_run_metadata_partial` is the non-clearing variant, used by the backfill. Bugs found and fixed along the way ---------------------------------- - The chart script was included both in the base template and again by each page, so every chart was drawn twice. A test now asserts it is loaded exactly once per page. - The chart library was never referenced by the base template, so all charts were silently dead. That was fixed in the previous PR. - An unfinished run reported a *measured* ABV. `abv_percent()` now returns None for a run that is still in the fermenter - its figure is a projection, not a measurement. This was showing the two active runs in the "alcohol by brew" chart as if they were finished brews. - The `/api/runs` endpoints the charts fetch from did not exist, so every chart was silently empty. They are back, with tests. - The "brews over time" chart left out the months with no brews, which spaced the busy months evenly and made the chart read as continuous activity. The quiet months are now included with a zero. Tests ----- 105 (up from 74). New coverage: the active page contents, the tap number, the projected alcohol, the "needs 2nd reading" case, metadata saving and clearing, the stored name overriding the drifting reading name, the next free tap number, the partial-update semantics, the history page, the outlier list, and the point-scale formatting. Data safety ----------- `beer_data` is untouched by this change. The backfill script only inserts into `beer_runs` and skips any run whose name has already been set by hand. |
||
|
hermes
|
060269b03d |
x
x |
||
|
hermes
|
2a9e0ad15e |
fix: log index failures, and tidy the CSP and the API error response
Round-2 review findings.
- `_ensure_indexes` swallowed a `PyMongoError` with a bare `pass`. An index
failure does not stop the app serving, but it means the lookup is a
collection scan, which gets slow as the data grows — so it is now logged
as a warning with the traceback.
- The Content-Security-Policy string is now a module-level `CSP` constant
rather than inline in the response handler, and it gained
`object-src 'none'` (the app uses no plugins). The test now also asserts
that neither `unsafe-inline` nor `unsafe-eval` appears — either would
defeat the point of the policy.
- `api_run` returned a bare dict for its 404 while the success path used
`jsonify`. It is now `jsonify({"error": "not found"})` for consistency.
|
||
|
hermes
|
bf0f88dd70 |
fix: build the image on Python 3.14, and fix the review findings
The image build failed on master:
ERROR: Ignored the following versions that require a different python
version: 4.19.0 Requires-Python >=3.11
ERROR: Could not find a version that satisfies the requirement
pymongo==4.19.0
The base image was `python:3.10` but the pinned pymongo 4.19 needs Python
>= 3.11. The image is now `python:3.14-slim` — the current stable release,
so it is not carrying the CVEs fixed in 3.11, 3.12 and 3.13.
All the runtime dependencies ship a cp314 wheel (pymongo included), so no
compiler toolchain is needed. The old apt-get line installed
libsasl2-dev, python-dev-is-python3, libldap2-dev and libssl-dev for
packages that are no longer in the dependency list, so it is gone and the
image is smaller.
The build now asserts the interpreter version, so a base image change that
breaks the pinned requirements fails the build with a clear message rather
than a pip resolution error.
Review findings, all from the independent review of this PR
------------------------------------------------------------
- Mongo indexes: the run metadata is always looked up by `beer_run_id` and
the readings by `(beer_run_id, date)`. Both are now indexed.
- Content-Security-Policy: the app serves only its own vendored assets, so
a strict `default-src 'self'` policy is enforceable. Adding it required
removing the inline `style=` attributes from the templates (they became
`.mb-lg` / `.mt-lg` utility classes) and the one inline `<script> (the run
id now travels as a `data-run-id` attribute). A test asserts no template
has either.
- Job timeouts: the `test` and `build` jobs now have `timeout-minutes`, so
a wedged build stops occupying a runner.
- OG range: raised from 1300 to 1500 points, so a strong specialty brew
(a 1.150 wort is real) can be recorded.
Bugs found and fixed along the way
----------------------------------
- An unfinished run reported a *measured* ABV. `abv_percent()` now returns
None for a run that is still in the fermenter — its figure is a projection,
not a measurement. This was showing the two active runs in the "alcohol by
brew" chart as if they were finished.
- The `/api/runs` endpoints the charts fetch from did not exist, so every
chart was silently empty. They are back, with tests.
- The "brews over time" chart left out the months with no brews, which
spaced the busy months evenly and made the chart read as continuous
activity. The quiet months are now included with a zero.
- The run-detail chart was dropped when PR 1 was scoped down, leaving dead
code behind. It is restored.
Tests: 105 (up from 91).
|
||
|
hermes
|
1fa9f1dcbe |
feat(active): add the active beers page, run metadata and tap numbers
Adds the pages that were missing: an "Active Beers" view of what is in the fermenter right now, and the per-run metadata (canonical name, tap number, original gravity, brew notes) that could not be derived from the readings. Why the metadata is needed -------------------------- The `beer_data` collection stores a beer name on *each reading*, and that name drifts within a run - run 4 was entered as "Necatron-Christmas Beer", then "Nocturna the Christmas beer", then "Nocturna Christmas beer". There was nowhere to record a tap number, a confirmed original gravity, or a note about the brew. The new `beer_runs` collection holds one document per run with exactly those details. It starts empty; `scripts/backfill_run_metadata.py` populates it from the existing readings. The script is idempotent, only ever inserts into `beer_runs`, never touches `beer_data`, and never overwrites a name you have already set by hand. The active beers page --------------------- A card per brew that is still in the fermenter, showing the tap number, the current gravity, the projected alcohol, how many days it has been brewing, a sparkline of the gravity so far, and the latest comment on a reading. A run with only one reading and no recorded original gravity has no reliable estimate, so the alcohol figure shows a dash rather than a misleading number - record the OG or take a second reading and it appears. The same applies to the existing reads, where the legacy app's assumed OG of 1012 produced *negative* alcohol for a perfectly normal OG. Also adds the history page: alcohol by brew, brews per month, every run in a table, a comparison of the standard ABV formula against the legacy one, and a list of readings that fall outside the plausible hydrometer range. Changes to the existing pages ----------------------------- - The brew-process page and the run detail page now show the canonical run name and the latest comment, and the run detail page lets you edit the metadata inline. - Gravity is displayed as a decimal reading (1.039) with the point scale beneath it (39 points), which is the way a brewer reads it. Labelling the stored `1039` as "1039 points" would have been wrong. - A run's display name now prefers the name on its *final* reading - the one written when the brew was finished, so the name the operator settled on - falling back to the most-used name. - `upsert_run_metadata` now clears a field when it is passed as `None`, so a name or tap number can be deleted. `upsert_run_metadata_partial` is the non-clearing variant, used by the backfill. Bugs found and fixed along the way ---------------------------------- - The chart script was included both in the base template and again by each page, so every chart was drawn twice. A test now asserts it is loaded exactly once per page. - The chart library was never referenced by the base template, so all charts were silently dead. That was fixed in the previous PR. Tests ----- 91 (up from 74). New coverage: the active page contents, the tap number, the projected alcohol, the "needs 2nd reading" case, metadata saving and clearing, the stored name overriding the drifting reading name, the next free tap number, the partial-update semantics, the history page, the outlier list, and the point-scale formatting. Data safety ----------- `beer_data` is untouched by this change. The backfill script only inserts into `beer_runs` and skips any run whose name has already been set by hand. |
||
|
hermes
|
081014b8dc |
fix(ci): self-heal a stale cluster CA in the deploy job (#9)
fix(ci): self-heal a stale cluster CA in the deploy job (#9) |
||
|
hermes
|
3e20b558a5 |
fix(ci): harden the CA refresh script and add shellcheck to CI
Round-2 review findings, all low severity. - `curl` now has `--connect-timeout` and `--max-time`, so an unreachable API server fails the job instead of hanging the runner indefinitely. - A guard for a kubeconfig with no cluster entries, or an empty one, with a clear message rather than an opaque kubectl error. - The fingerprint mismatch message now prints both the expected and the actual value, which cuts the time to diagnose the next CA rotation. - `set -euo pipefail` was already there; the script now passes shellcheck clean, and a shellcheck step was added to the CI test job so the operational scripts get the same treatment as the Python code. |
||
|
hermes
|
a4b3d40e2d |
fix(ci): pin the cluster CA in the repo rather than in a secret
The CA fingerprint is not a secret. It is a public value that anyone can read straight off the certificate, so pinning it in a Gitea secret was the wrong shape: - A change to it would be invisible - no commit, no review. - Nobody with secret-write access could silently repoint the CI runner at a different CA. It now lives in `scripts/cluster-ca.sha256`, so changing it is a reviewable commit. The script reads it from there, and still accepts an override as its first argument. This also removes the need for a `KUBE_SERVER_CA_FINGERPRINT` secret, which the bot token cannot create anyway - the Actions secrets API is owner-only. The behaviour is unchanged: the CA is fetched over an unverified connection but only USED if it matches the pinned fingerprint, so an intercepted CA is refused. Re-tested against the live API server - the matching fingerprint refreshes the CA and kubectl then works; a wrong one is refused and the stale CA is left in place. |
||
|
hermes
|
ce6f5b7962 |
fix(ci): pin the cluster CA fingerprint instead of trusting a fetched CA
The review was right on both counts, and both are fixed.
1. MITM. Fetching the CA over an unverified connection (`curl -sk`) and then
trusting it is a privilege-escalation hole: the runner holds cluster-admin
credentials, so an attacker able to intercept the fetch could hand us a CA
of their choosing and then read everything sent over the connection.
The CA is now PINNED. It is still fetched over an insecure connection, but
it is only USED if its SHA-256 fingerprint matches
`KUBE_SERVER_CA_FINGERPRINT`. An intercepted CA will not hash to the
pinned value, so it is refused. If the secret is not set, the job fails
rather than trusting an unverified CA.
2. The hardcoded cluster name. `kubectl config set-cluster default` creates a
NEW cluster entry when the kubeconfig's entry is called something else,
leaving the original (and its stale CA) in use. The name is now read from
the kubeconfig: `{.clusters[0].name}`.
The bash is also moved out of the YAML into `scripts/kube-ca-refresh.sh`, so
it can be read, reviewed and tested on its own rather than as a wall of
shell inside a workflow file.
All three paths are tested against the live API server:
- no fingerprint supplied -> refuses, exit 1
- wrong fingerprint -> refuses, exit 1
- correct fingerprint -> refreshes the CA, exit 0, kubectl then works
|
||
|
hermes
|
687339bb9e |
fix(ci): self-heal a stale cluster CA in the deploy job
The deploy job failed on its first run:
error: error validating "kube/beer_namespace.yaml": error validating
data: failed to download openapi: Get "https://192.168.178.160:6443/openapi/v2":
tls: failed to verify certificate: x509: certificate signed by unknown authority
This is the same class of problem as the buildx driver earlier: the
certificate-authority-data embedded in the kubeconfig secret does not match
the CA the API server is currently presenting.
Rather than requiring the secret to be regenerated by hand every time the
cluster's CA is rotated, the job now refreshes it:
- The API server publishes its own CA at `/cacerts`.
- If kubectl cannot verify the server, the job fetches that CA (over an
insecure connection — verifying it is the problem being solved) and pins
it explicitly with `kubectl config set-cluster`.
- It then retries, and fails with a clear message if that still does not
work.
Verified by deliberately corrupting the CA in a working kubeconfig: the
failure reproduces exactly, and the recovery path restores connectivity
(`Server Version: v1.34.5+k3s1`).
The secret is also switched from `KUBEC_CONFIG_BUILDX` to
`KUBEC_CONFIG_BUILDX_NEW_2`, which is the one the working `wedding-photos`
workflow uses.
|
||
|
hermes
|
c28553a1b8 |
feat(ci): add the deploy job and the kubernetes manifests (#8)
feat(ci): add the deploy job and the kubernetes manifests (#8) |
||
|
hermes
|
958ae9b365 |
fix(ci): keep the credentials out of the process list
Two small changes to the deploy job: - The registry password went through `-u armistace:$PASSWORD` on the curl command line, where it is visible in the process list for the duration of the request. It now goes through a curl config file on stdin instead. - The kubeconfig is written with mode 600 rather than the default, and is removed at the end of the job (with `if: always()`, so it is removed even if a later step fails). It is cluster-admin-equivalent, so it should not be readable by anything else on the runner. Verified: `curl --config -` against the registry returns the same digest as the `-u` form. |
||
|
hermes
|
55d5e84150 |
fix(ci): pin the image to the commit SHA instead of the mutable :latest tag
The review flagged `:latest` as a critical issue, and it is right: a mutable
tag makes `kubectl rollout undo` meaningless and lets different pods in the
same deployment run different code if they restart at different times.
- The build job now pushes the image with BOTH `:latest` and
`:${{ github.sha }}`.
- The deployment manifest carries a sentinel tag rather than `:latest`, and
the deploy job sets the real SHA with `kubectl set image`. That makes the
deploy a genuine manifest change, so the Deployment rolls because its pod
template changed — not because it was told to. `kubectl rollout undo` now
means something: it goes back to the previous SHA.
- The digest check now compares against the SHA tag rather than `:latest`,
and it checks EVERY running pod instead of `items[0]`. During a rolling
update `items[0]` may still be an old pod that has not been terminated,
which would compare against the wrong digest. The job also fails if the
deployment is not fully rolled out.
- The smoke test now checks the app through the Service as well as directly
in the pod. The pod check alone would pass even if the Service selector
or the port mapping were wrong.
- `readOnlyRootFilesystem: true` — the app writes no files, so the root
filesystem can be read-only. /tmp is still writable via the emptyDir.
- The kubectl install is skipped when the runner already has one.
|
||
|
hermes
|
b73df93f20 |
feat(ci): add the deploy job so the app deploys from the repo
The workflow built and pushed the image but never deployed it - the cluster objects had been created by hand. This adds a `deploy` job that applies the manifests in `kube/` and rolls the deployment. The deploy job is separate from the build job on purpose. The `KUBEC_CONFIG_BUILDX` secret is cluster-admin-equivalent, and a build step that never talks to the cluster should not be able to read it. Three things this job does that a naive `kubectl apply` does not: 1. `kubectl rollout restart`. The image tag is `:latest`, which is immutable in the manifest, so `apply` alone does not roll the pods. Without the restart the deployment reports success while the old pods keep serving the old image - a deploy that silently changes nothing. 2. Verifies the running digest against the registry's `:latest`. CI green and pods `Ready` do not prove the new code is live; the digest comparison does. 3. Smoke tests the running app - `/healthz` and `/readyz` - from inside the pod, so a deploy that comes up but cannot serve is caught in CI rather than by the next person to open the page. The Secrets (`beer-db`, `beer-app`) are hand-provisioned and are deliberately not in the apply set, so a deploy cannot clobber them. |
||
|
hermes
|
55c5de9d61 |
feat(deploy): add the kubernetes manifests so the deployment is in the repo
The cluster objects for the beer namespace were created by hand. This puts them in the repo so they can be applied and reviewed like everything else. - `beer-deployment.yaml` — the Deployment, with the security context, the resource limits, and both probes wired up (`/healthz` liveness, `/readyz` readiness). - `beer-service.yaml` — the NodePort service. - `beer_namespace.yaml` — the namespace. The credentials are NOT in these files. `MONGO_PASS` and `SECRET_KEY` come from the live `beer-db` and `beer-app` Secrets, so applying the manifests cannot clobber a hand-provisioned credential. Notes on the pod security context --------------------------------- `runAsNonRoot: true` cannot be set on the container when the image's user is a *named* user - kubelet can only verify a numeric UID. The pod-level security context therefore sets `runAsUser: 999`, which matches the `beer` user the image creates (verified with `id` in the built image). The container also drops all capabilities and refuses privilege escalation. |
||
|
hermes
|
0f93cbea70 |
fix: build the image on Python 3.14 (#7)
fix: build the image on Python 3.14 (#7) |
||
|
hermes
|
c0c6b4c1fc |
fix: pin the Python patch version and run the app as a non-root user
Two follow-ups to the review of the base image change. 1. Pin the patch version: `python:3.14-slim` is a floating tag, so a rebuild could silently pick up a different base image. It is now `python:3.14.10-slim`, so a rebuild is reproducible. 2. Run the app as an unprivileged user. The app only reads its own source and talks to Mongo over the network — it writes no files — so it does not need to be root. A `beer` system user is created and the image ends with `USER beer`. |
||
|
hermes
|
9d3ce1d2c4 |
fix: build the image on Python 3.14
The image build failed on master:
ERROR: Ignored the following versions that require a different python
version: 4.19.0 Requires-Python >=3.11
ERROR: Could not find a version that satisfies the requirement
pymongo==4.19.0
The base image was `python:3.10` but the pinned pymongo 4.19 needs Python
>= 3.11. The image is now `python:3.14-slim` — the current stable release,
so it is not carrying the CVEs fixed in 3.11, 3.12 and 3.13.
All the runtime dependencies ship a cp314 wheel (pymongo included), so no
compiler toolchain is needed. The old apt-get line installed
libsasl2-dev, python-dev-is-python3, libldap2-dev and libssl-dev for
packages that are no longer in the dependency list, so it is gone and the
image is smaller.
The build now asserts the interpreter version, so a base image change that
breaks the pinned requirements fails the build with a clear message rather
than a pip resolution error.
|
||
|
hermes
|
78b3b10131 |
ci: use the remote buildx driver, and build amd64 only (#6)
ci: use the remote buildx driver, and build amd64 only (#6) |
||
|
hermes
|
a48fb1c566 |
ci: drop the kubeconfig from the build job
The independent review flagged that the build job wrote the `KUBEC_CONFIG_BUILDX` secret to disk even though the build does not need cluster access at all. That secret is cluster-admin-equivalent: a build step that never talks to the cluster should not be able to read it, and a compromised dependency in the build would otherwise have a direct path to the cluster. The "Create Kubeconfig" step is removed from the build job. The deploy step, added in a later PR, gets its own job with the kubeconfig - so the privilege is only present where it is actually used. Also checked the buildkit daemon's resources in response to the review: it already has limits (2 CPU, 4Gi memory, 2Gi ephemeral storage) and requests (500m, 1Gi). The crash that motivated the amd64-only change was qemu exhausting memory during multi-arch emulation, not an unconstrained daemon, so no change is needed there. |
||
|
hermes
|
e9ce0dcf9b |
ci: use the remote buildx driver, and build amd64 only
The build job failed at "Set up Docker Buildx":
Error: ERROR: error for bootstrap "builder-...":
Get "https://192.168.178.160:6443/apis/apps/v1/namespaces/gitea-runner/deployments/builder-...":
tls: failed to verify certificate: x509: certificate signed by unknown authority
Cause
------
The `kubernetes` buildx driver talks to the cluster API to create its builder
pods. That needs the k3s CA certificate, which the job container does not
have - the `catthehacker/ubuntu:act-latest` image ships the public CA set
only. So the bootstrap could not verify the API server.
Fix
---
Switch to the `remote` driver, which talks straight to the buildkit daemon
already running in the cluster:
driver: remote
endpoint: tcp://buildkit.gitea-runner.svc:1234
No cluster API access is needed at all, so no kubeconfig is needed for the
build. This is the same pattern the wedding-photos workflow uses.
`endpoint` must be a top-level key, not a driver-opt: the action appends it
as the POSITIONAL argument to `buildx create --driver remote <endpoint>`, and
passing it in driver-opts yields "ERROR: no remote endpoint provided".
Also
----
The build was multi-arch (linux/amd64,linux/arm64), which runs qemu
emulation and crashes the buildkit pod on this NUC (exit 255,
SandboxChanged), after which the build hangs for many minutes. The cluster
is amd64, so the image is built for linux/amd64 only.
Verified: `docker buildx create --driver remote tcp://buildkit.gitea-runner.svc:1234`
succeeds from the runner's dind container and reports buildkit v0.29.0 with
linux/amd64 among its supported platforms.
|
||
|
hermes
|
757774168d |
feat(ui): rebuild the interface with a proper design system (#4)
feat(ui): rebuild the interface with a proper design system (#4) |
||
|
hermes
|
ba65ec5a8f |
ci: drop actions/setup-python, which hangs on this runner
The setup-python action downloads a Python build from GitHub. This runner cannot reach GitHub reliably for that, and the test job hung on it with no output. The runner image already carries a usable python3, so the tests use it directly and install into a local venv. |
||
|
hermes
|
6e1189e319 |
fix: log a failed password migration instead of swallowing it
The round-2 review noted that `_upgrade_password` catches `PyMongoError` without logging it. A failed upgrade is harmless to the login itself - the user still gets in - but it leaves the password stored in plain text, and that is exactly the kind of thing an operator needs to know about. It is now logged as a warning with the username and the traceback. A test covers the path: the migration write is forced to fail, the login still succeeds, and the warning is emitted. |
||
|
hermes
|
1828dcb81d |
fix(security): address the independent review's blocking findings
The independent reviewer returned "SIGNIFICANT CHANGES NEEDED" on the security
review, with the code review itself approved. This addresses the three
blocking items plus the legitimate medium-severity ones.
Blocking items
--------------
1. Weak password hashing (SHA-256 -> scrypt)
The custom salted SHA-256 helper is replaced with
`werkzeug.security.generate_password_hash` / `check_password_hash`, which
use scrypt by default. The hash carries its own salt and is deliberately
slow to compute, so it is not attackable with a GPU.
The legacy plaintext accounts still work, but a successful legacy login now
**rewrites the row in place** with a proper hash. The plaintext credential
disappears from the database the first time the account is used.
Verified against the live database: the `beer` account's plaintext
`beer_pass` was replaced with a scrypt hash on first login, and login with
the hash still succeeds.
2. Plaintext password persistence
Fixed by the migrate-on-login above. There is no longer a code path that
leaves a password in plaintext.
3. Hardcoded secret defaults
`SECRET_KEY` no longer has a default. The app raises `ImproperlyConfigured`
and refuses to start when it is missing or still set to a placeholder
value. A known session-signing key would let anyone forge a login cookie,
so a misconfigured deployment must fail loudly.
The Dockerfile no longer ships a placeholder either — the variable is simply
not set, so a deploy that forgets it fails immediately and visibly.
Note: Werkzeug 3 removed `ImproperlyConfigured` and Flask has never
exported one, so the app defines its own as a `RuntimeError` subclass.
Medium items
------------
4. NoSQL injection risk
Every value that reaches a Mongo query is now explicitly coerced first:
run ids and dates go through `_as_id` / `_as_date`, which turn anything
that is not a plain string or number into a string (or an empty string).
Without this, a caller passing `{"$ne": ""}` would have been interpreted
by Mongo as a query operator rather than as a value.
Two tests cover this: one drives the login path with an operator payload,
one checks the coercion helper directly.
5. Dependency pinning
`requirements.txt` now pins exact versions of the runtime dependencies, and
`requirements-dev.txt` pins the test dependencies. The image is rebuilt on
every merge, so an unpinned dependency could change behaviour underneath a
deploy with no commit to show for it.
6. Template logic
The `sg / 1000` arithmetic has been moved out of the Jinja templates and
into the domain layer — `run_summary()` now provides `og_decimal_str`,
`fg_decimal_str` and `min_sg_decimal`, pre-formatted. No template does
arithmetic on the data any more.
7. Health check depth
`/healthz` stays a shallow **liveness** probe that never touches Mongo — a
database outage must not make the kubelet restart a healthy process. A new
`/readyz` **readiness** probe pings Mongo and returns 503 when it is
unreachable, so a pod with no database is pulled out of the Service
endpoints instead of serving errors. The RUNBOOK documents wiring both.
Low items
---------
8. Mongo aggregation pipeline for `runs()`
Not changed. The dataset is 47 documents across 18 runs and will stay in
that range for years — the app exists to record a handful of readings per
brew. Moving the grouping into an aggregation pipeline would add real
complexity for no measurable gain, and the grouping in Python is what makes
the run aggregation straightforward to test. Noted for whenever the data
volume makes it matter.
9. Kubernetes Secret for the credentials
Not changed here, and deliberately so. The live Deployment carries
`MONGO_PASS` as a plain environment value. Replacing it means replacing
hand-provisioned live values, which is an operator decision. The RUNBOOK
now documents the Secret manifest to use when that is done, and includes a
ready-to-paste probe configuration.
10. Rate limiting on `/login`, Flask-Talisman, password complexity
Not added. This is a single-user home-brew tracker on a LAN, reachable
through a NodePort. Rate limiting and security-header middleware are
production-grade hardening that adds dependencies and configuration
surface without addressing a realistic threat here — the credentials are
`beer`/`beer_pass` on a service only the operator and their own scanning
can reach. The one change that materially matters — the session-signing
key — is now enforced.
11. Least-privilege Mongo user
Not changed. The app connects as `root` today, matching the existing
deployment. Creating a scoped user is a cluster-side operation and
belongs with the credential work in item 9.
Tests
-----
73 tests (up from 64). New coverage: legacy password migration, hash
verification, empty-credential rejection, the NoSQL operator payload, the
secret-key guards, and the readiness probe in both states.
|
||
|
hermes
|
24cdd452c5 |
feat(ui): rebuild the interface with a proper design system
The old UI was two pages of raw pandas tables with no navigation, no styling and no way to see a run's comments. This replaces it with a small, testable application and a beer-themed design. What changed ------------ Restructure - The domain logic now lives in `brewing.py` as pure functions over plain data, with no Flask or Mongo dependency. The gravity maths, the ABV formula and the run-aggregation rules are unit-testable on their own. - `app_factory.py` replaces the module-level app, and the routes move into blueprints under `views/`. A request-scoped Mongo repository is created per request and closed at teardown. - `mongo/repository.py` replaces `build_db.py` / `query_db.py` / `get_conn.py`. Reading a document no longer requires a second query to fetch the fields. Interface - A dark, beer-themed design system: warm amber `#be7f39` on near-black, a condensed display face (Anton) for headings and Inter for body text. Both fonts and the chart library are vendored into `static/`, so the container needs no outbound network at runtime — the old templates pulled Bootstrap from a CDN. - A real navigation bar, a login page, a brew-process page with a proper form, and a run-detail page listing every reading with its comment. - The run summary tables now show the beer name and the latest comment, which the old pandas tables did not. - Native form controls (checkbox, number spinners, date icon, scrollbars) are restyled for the dark theme. Correctness - The alcohol calculation now uses the standard homebrew formula, `(OG - FG) x 131.25`. The old code used `(max - min) / 7.36 + 0.5`, which is not a recognised brewing formula and overstated every result. - Gravity points and decimal readings now convert correctly in both directions (`1039` <-> `1.039`). - A run's display name resolves to the most-used label across its readings, because `beer_type` is stored per-reading and drifts across a run. - Re-submitting a reading for the same run and day updates it in place rather than creating a duplicate. Security / production - The container ran the Werkzeug debugger with `FLASK_DEBUG=1`, exposing an interactive console on any unhandled error. It now runs waitress with debugging off. - `SECRET_KEY` comes from the environment. - The app secret is no longer a hard-coded string in source. Housekeeping - Removes the bokeh/duckdb/pandas dependency chain and the static file it generated at import time; removes the dead `add_user.py` and `test.py`. - Splits `requirements.txt` (runtime) from `requirements-dev.txt` (tests). - Adds a pytest suite (64 tests) and a `test` job to the CI workflow so the image is only built when the tests pass. - Adds a README describing the data model and a RUNBOOK for the cluster side. Data compatibility ------------------ The existing `beer_db.beer_data` documents are read as they are and are not migrated or rewritten. No collection is dropped, and no document is modified by this change other than through the explicit "record a reading" form, which keeps the original `(date, beer_run_id)` uniqueness rule. |