a38febaca89d18d710c33702febe4963457d67f0
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 hermes
|
794df0c12e |
fix(charts): leave the suspect and active runs out of the bar charts
The second review of PR #12 (after the suspect-run fix) found that the two BAR charts were still plotting runs they should not have been, while the curve chart and the tiles had been corrected. The page was contradicting itself. The ABV chart plotted the suspect run -------------------------------------- Run 12's impossible reading gives it an ABV of 18.64%. The chart's y axis went to 18.64, so the fifteen real bars were squashed into the bottom ~45% of the plot - while the "Strongest 8.53%" tile on the same page showed the correct figure. The chart now leaves the suspect runs out. The attenuation chart plotted the active runs ---------------------------------------------- An active run's attenuation is measured against its CURRENT gravity, so a brew that has just started shows a 0% bar. That is the absence of a result, not a result, and it sat directly above the table of finished brews. The chart now leaves the active runs out. Verified against the live data: ABV chart bars: bars=15 max=8.53 (was 16 bars, max 18.64) attenuation chart bars: bars=15 min=76.2 (was 17 bars, min 0) A suspect active run no longer vanishes --------------------------------------- The API flags suspect runs over EVERY run, so the charts leave them out. But the analysis page only looked at the finished ones, so an active run with a bad reading would be dropped from the charts and never listed in "Readings that need a second look" - it would disappear with no explanation anywhere. The analysis page now lists suspect active runs too. The figures say what they are based on -------------------------------------- - The analysis prose counted the non-suspect runs, not the ones that actually contributed a figure to the mean. It now counts the latter. - The history page's "Average ABV — across finished brews" was averaging 15 of 16 without saying so, while the analysis page said "16 brews (15 counted)". It now says "across 15 of 16 finished brews". - `/api/runs/<run_id>` carries the `suspect` and `active` flags that `/api/runs` does. 148 tests (up from 142). |
||
|
hermes
|
76a4d0805c |
fix(analysis): the review findings - rising gravity, undated readings, the band
A second, deeper review of PR #12 found five things the first review did not. All are fixed here. The band was not the band ------------------------- The fermentation curve's shaded range was drawn as ONE dataset with `fill: "+1"`, which fills to the NEXT dataset - and the next dataset was the median line, not the maximum. So the band shaded min-to-median, the upper half of the range was drawn as a hairline but never shaded, and the tooltip said "range min to max" while the picture showed something else. The band is now two datasets - the min curve filled down to a max curve - with the max hidden from the legend. Rising gravity -------------- `attenuation_percent` rejected a final gravity below 1.000 and one implying more than 100% attenuation, but a run whose gravity went UP produced a NEGATIVE attenuation - which was then averaged into the headline figure and plotted as a negative bar. Verified against the live code: OG 1010 -> FG 1020 gave -100.0%. Now rejected, and reported by `implausible_runs` with the reason "the gravity went up, which is usually a mis-ordered pair of readings". Undated readings ---------------- An undated reading sorted to the front of the run, so it became the original gravity - which put the OG after the FG and produced a negative attenuation. The OG now comes from the earliest *dated* reading, and `days_to_target` skips the readings it cannot place on the timeline rather than giving up on the whole run. Verified: readings 1050 (dated), 1005 (undated), 1010 (dated) gave None instead of 24 days, and an OG of 1005 instead of 1050. Active runs on the curve ------------------------ The curve chart filtered on `curve.length > 1` only, so it plotted the active runs as well - a partial fermentation on a chart meant to describe how a completed one behaves. It now excludes them, along with the suspect runs. Four fetches, one payload ------------------------- `/api/runs` carries every reading of every run, and four charts each fetched it independently - so the analysis page made two identical round-trips of the whole collection. There is now one shared fetch. Also ---- - The "Readings that need a second look" table links to the run, so a suspect reading can be corrected in one click. - `days_to_1015` and the `curves` variable were computed and never used. Removed. - A reading below 1.000 now says what it is - "beer cannot be less dense than water, so this is almost certainly a typo (a 1.012 reading entered as 012?)". The reading is still SAVED: rejecting it would lose the brewer's actual observation, and seeing it recorded is how they spot the mistake. 142 tests (up from 134). |
||
|
hermes
|
6fec78e9e4 |
fix(analysis): address the two review nits
The re-review returned APPROVED with two low-severity notes. - The prose said "Across 15 finished brews", which reads as though there are only 15 brews. It now says "Across 15 of 16 finished brews", so the exclusion is visible in the sentence itself and not only in the card header. - `/api/runs/<run_id>` did not carry the `suspect` flag that `/api/runs` does, so a consumer of the detail endpoint could not tell an impossible run from a good one. It does now, with a test. 134 tests. |
||
|
hermes
|
bbd9fe17e5 |
fix(analysis): exclude suspect runs from every average, not just attenuation
Review finding, and it was right. The PR claimed that runs with impossible readings were "excluded from the averages". That was only true of the attenuation average. Run 12's bad final gravity was still poisoning three other statistics: - **Brew time** - its 56 days were folded into the average, making a typical brew look like 13.7 days when it is 10.9. - **Time to 1.010** - its 56 days did the same to that figure (8.4d). - **The history page's ABV** - an 18.64% ABV, which made run 12 the "strongest" beer in the history and pulled the average up. - **The fermentation curve** - its curve plunges from 1.042 to 0.900, which dragged the median line down and stretched the min-max envelope to cover a gravity below water. One bad reading was reaching four different statistics. What changed ------------ - The suspect runs are computed once and excluded from every aggregate: the attenuation, brew-time and time-to-1.010 averages, the fastest and slowest brews, the history page's ABV average, and its strongest and lightest. - `/api/runs` now carries a `suspect` flag, and the charts skip the flagged runs - the attenuation chart and the fermentation curve. - The suspect run stays in the table, with a "not counted" chip and a tinted row, so it can be corrected. It is excluded from the figures, not hidden. The card header says "16 brews (15 counted)" and the prose says how many brews the figures are based on. Tests ----- 133 (up from 127). New coverage: the suspect run is excluded from the brew time and time-to-1.010 averages, it is still listed for review, it is flagged in the API, it is not the strongest brew in the history, and the charts filter it out. The `logged_in` fixture moved to conftest.py, where both test modules can use it. |
||
|
hermes
|
e1a9a7384f |
feat(analysis): attenuation, fermentation curves and brew timings
Adds the analysis page the old app never had: how consistently the brews
ferment, and how long each one takes.
What it shows
-------------
- **Attenuation by brew** - what fraction of the original gravity was
fermented away, for every finished brew.
- **Fermentation curves** - the typical shape of a fermentation, drawn as a
median curve with the min-max envelope behind it. Plotting every brew
individually gave 16 near-identical lines and an unreadable legend.
- **Every finished brew** - OG, FG, ABV, attenuation, days in the fermenter,
days to reach 1.010, and the finish date.
- **Readings that need a second look** - readings outside the plausible
hydrometer range.
- Headline figures: average attenuation and its spread, average brew time,
average time to 1.010.
Data quality
------------
One live run (run 12) has a final gravity of 900, which worked out as 338%
attenuation and dragged the average to 103.2%. That is not a real result,
so:
- Attenuation is rejected when the final gravity is not physically possible
for the original gravity.
- Runs that fail that check are EXCLUDED from the averages rather than
silently distorting them, and are listed on the page as needing review.
- The average now reads 87.5% +/- 7.4 percentage points across 16 brews.
Chart bugs found while building this
------------------------------------
- **The gravity charts had their y axis reversed.** With `reverse: true`
the high reading sits at the BOTTOM, so the fermentation curve climbed
left to right - it read as gravity *rising* as the beer fermented. A
brewer reads a fermentation as a descending line. The point-scale run
chart on the run detail page had the same bug. Both are fixed.
- **The curve chart's x axis was treated as categorical.** The x values are
numeric (0-100), and Chart.js defaults a line chart's x axis to
category, which collapsed every point onto index 0 and rendered the
curve as a sliver at the origin. The axis is now explicitly linear.
- **The curve was interpolated by exact key lookup**, so it only worked when
every brew happened to be read at the same progress points. It now
interpolates between a brew's actual readings, and the curve carries 21
points across the full range.
- **Long beer names were clipped** at the left edge of the attenuation
chart ("...x crying out loud"). Names are trimmed to 18 characters with
an ellipsis; the tooltip and the table carry the full name.
Tests
-----
127 (up from 105). The two chart regressions are covered by reading
`charts.js` and asserting the gravity axis is not reversed and that long
names are trimmed - these are exactly the kind of change that silently
reverts, and they are invisible to a screenshot test.
|